Torquer Truck Engine

351w / 360 HP with 400 lbs. Torque

• Blueprinted machined 351W Block

• Nodular Cast Iron Crankshaft, deburred
   and micro polished

• Shot peened hardened connecting rods
   with 190,000 psi bolts

• Hyperuetectic 9.5 to 1 Federal Mogul Pistons w/Duralube Coating

• Sealed Power Chrome Moly Rings

• Heavy Duty Double Roller Melling Timing Set

• Megatorque Hydraulic Roller Camshaft NEW

• Tri-Metal Federal Mogul Bearings

• Aluminum fast burn  Edelbrock RPM cylinder heads with stainless steel valves, hardened valve locks, chrome moly retainers and HD Valve Springs

• Chrome Moly  pushrods

• 1.6 to 1  Ratio Comp Cams Magnum Roller Rockers

• New Melling Oil pump

• Complete Fel-pro Gasket set

• New Harmonic Balancer

• New Flexplate for Automatic Trans.
   (Standard Flywheel SFI approved add $325)

• New Rear Sump Truck Oil pan, Timing cover

• Chrome Baffled Valve Covers

• Edelbrock Performer RPM Dual Plane Intake

• Edelbrock 650 cfm Truck Thunder Series 4 barrel Carburetor with electric choke

• New High Flow Water pump 

• New Fuel Pump and fuel lines

• Electronic Pertronix Ignition Distributor &  45,000 volt coil with Vacuum advance

• New Champion Spark plugs gapped and installed

•  8mm Accel Silicone Wires

• New Thermostat Housing

• Chrome 14 inch Air Cleaner

• PCV Ventilation System

• New Fuel Lines and Gas Filter

• Ignition Timing Set, Carburetor fully adjusted

• Hot Run tested and dialed In place

• Video Footage with engine running in our test Stand for your personal record

• Packaged and Crated for Shipment