1986-1993 MUSTANGS

 460 HORSE POWER 408w  Stroker  FORD HIGH OUTPUT

•  PRECISION MACHINED 351w BLUEPRINTED BLOCK

• NEW SCAT CAST STEEL CRANKSHAFT 3.85 STROKE

•  STEEL I BEAM CONNECTING RODS WITH 190,000 PSI ARP BOLTS

• SRP FORGED PISTONS 9.75 TO 1 COMPRESSION

• J & E CHROME MOLY PISTON RINGS

• 3 PIECE STEEL ROLLER STYLE TIMING CHAIN

• STEEL ROLLER RETROFIT COMP CAMS  CAMSHAFT

• COMP CAMS 1.6 RATIO MAGNUM ROCKERS

• NEW MELLING OIL PUMP

• EDELBROCK ALUMINUM RPM CYLINDER HEADS 60cc

• 2.02 STAINLESS STEEL INTAKE VALVES

• 1.60 STAINLESS STEEL EXHAUST VALVES

• HARD SEATS FOR UNLEADED OR REGULAR FUEL

• HEAVY DUTY 1.45 DIAMETER VALVE SPRINGS, 7 DEGREE LOCKS

• COMP CAMS CHROME MOLY PUSH RODS

• NEW FOX BODY REAR SUMP OIL PAN

•  TIMING COVER AND EFI ALUMINUM BAFFLED VALVE COVERS

• HEAVY DUTY FLEXPLATE FOR AUTOMATIC APPLICATIONS              (Manual Transmission Flywheel add $295.00)

• BALANCED, BLUE PRINTED, HAND ASSEMBLED BY ASE TECHNICIANS

• NEW HIGH PERFORMANCE EDELBROCK EFI INTAKE MANIFOLD & PLENUM

• NEW POLISHED FUEL RAIL

• NEW EDELBROCK 70MM THROTTLE BODY with Adapter

• NEW 30lb. FUEL INJECTORS 

• RACE  PREPPED FORD DISTRIBUTOR

• NEW CHAMPION SPARK PLUGS & HEAVY DUTY IGNITION WIRES

• NEW WATER PUMP

• NEW DIP STICK AND TUBE 5 QUARTS OF VALVOLINE OIL AND FILTER

• COMPLETE P.C.V. VENTILATION SYSTEM

$10,895.00

---

1-800-704-5385

---

• Will swap over from a 5.0 litre with the use of  proper Exhaust Manifolds A/C & Power Steering Brackets

• 86-88 year Mustangs may require conversion from Speed Density to Mass Air to run properly. Also an upgraded computer chip may be necessary to purchase (Ex: Hypertech or Superchips) to work with any modified computer controlled engine.

• Wiring Harness, Sensors, ECU and front pulleys need to be transferred from original engine

• Fuel Injected engines spin tested for oil pressure, leaks and compression. They are not live run tested as our Carbureted engines are. Fine tuning and breaking in is left up to the installing mechanic.