Satisfied Customer Letters

 

The people at the Engine Factory,                                                                                               April 3, 1999

            Approximately 6 years ago I purchased a 302 engine and to this date it has

286,334 miles on it and except to change the valve cover gaskets it has

never been apart. Needless to say I'm quite pleased with the engine so

much that I decided to purchase a 351 engine for an 84 F150 that I recently

purchased. Keep up the good work!

                        Thank You,

                                    Jim Villano

                                    Frenchtown, NJ.   

______________________________________________________________________________________________

 

Dear: Chris and the Engine Factory Crew                                                                  February 9, 1999

  The new engine is in and purrs like a kitten, I'm waiting a few days

  to put the exhaust on. But everything is great, thank you for your time.

  Thanks Again,

    Cory Smith

   Franfurt, Germany

________________________________________________________________________________________________________

 

 Engine Factory Crew,
Don't know if you remember me but I finally got my Cobra on the road after 2.5 years of building.  I have one of your 351W short blocks that I built up.  Car runs very strong and I am totally pleased with the work you guys did and the great service.  Thanks.
 Bob Lesnick
Feel free to use any of the photos and you can use me as a reference.
 Bob (Roscoe on ClubCobra and CobraForum)
 
R. L. Lesnick
Gamma Investigative Research, Inc.
P.O. Box 10981, Fairfield, NJ  07004
Licensed New Jersey/New York
 
(973) 227-1415  (800) 878-9393 

 

_________________________________________________________________________________________________

 

To the Engine Factory Team,

I just wanted you all to know that the Windsor you built for me almost a
year ago is running great and as strong as ever.
You can check it out here at the Club Cobra site.
Keep up the good work guys!!

Sincerely,
Paul Campanale
Florida
_______________________________________________________________________                                                              

Hi Guys,
 
Just dropping you a note that I have the engine in and am scheduling to have the new exhaust system installed.
 I started her up the other day and Oh My God!  With the open headers the first time she started scared the s--t out of me.   That baby started went right to warm up speed with the choke and once it got to running temp Oh man Oh man. 
 Way Cool!
 My complements to Tim and let him know I'm trying to get some pictures to you guy's.  
 More to come!
 Thanks again for all your support for this project.

John Lewis, Bremerton Washington  jlewis@fed-fire.com    3/10/03

302 / 373 HP Turnkey Engine

_______________________________________________________________________                                                              

The Ford team @ engine factory,
 Well guys i have about 300 miles on the engine now, plus a Car Show in Chesapeake Va; where I took 2nd place in my class. You guys would not believe the the number of people crowded around that car to look at that awesome engine and ask, WHERE THE HELL DID YOU BUY THAT ENGINE!!  
EVEN WITH YOUR STICKER ON THE AIR CLEANER!!
 I might have sold a couple that week. How about sending me some business card when you get a chance!! I will pass them out among our club members.
 I only have 1 problem, all the gear heads I meet at 7-11 or at car shows want to race me!! of course i refused gracefully by telling them I only have a few miles on the engine.
 I did take her up to 75 or 80 a few times and didn't take long to get there, seemed like a few seconds.
 Chris for your info notes, if someone uses 76 to 81 Granada spindles for disc brake application tell them they have to change the inner and outer tie rods, center link, and pitman bar to Granada also.
  I can not thank you guys enough for the fine job that was done on that engine, runs, sounds and performs GREAT!!!!
 Talk again later only 150 more for the oil and filter chg.
                        Ralph Moran      ralphmoran3@cox.net   8/13/03

_________________________________________________________________________________________________________________________________________________________

Dear Engine Factory,

Received engine today.  I expected a quality product but overwhelmed by engine.  Thanks for your excellent service and product.  Will forward photographs of car when completed.  Big thanks.

Bill Crowfoot (GT 40 Replica) 302 High Output Engine  United Kingdom 2/24/04

Hey Guys,
                Just wanted to let you know I received my new 418w motor this past Tues. right on time just like you said.  Man, it is an absolute beauty!  I didn't know I was going to be receiving the boxes of all the parts and numbers that was used for the motor.  I was really impressed by that getting to see what exactly went into the engine.  Also, I was very impressed by the video that came with the motor.  It was extremely informative and helpful with all the complete details about the motor, and what I need to do far as installation goes.  You guys were very helpful with my order, and delivered a fine product in a fast timely manner.  I still can't get over how good the detailing of this engine is, and how awesome it looks!  Also, the signature of Tim on the block shows me you guys take real pride and workmanship in your products.  I am very confident in this motor, and sure it will provide me with a lot of fun street/strip use with many years to come.  I just can't wait to get it in the car and go show it off!  I would highly recommend The Engine Factory to anyone who wants to do a motor swap, and have all the guess work taken out.  I will definitely be spreading the word about you guys to people I know who are thinking about doing motor swaps.  Once again, I am very pleased with my engine and thank you Chris along with the rest of The Engine Factory crew with all yal's help delivering me a supreme 418w motor for my 1991 Mustang restoration project.
                          Thanks, Chad Robertson  3/1/04  Central Florida  chadrobertson@bellsouth.net

 

Hi Guys,

Just thought I would drop you a line to thank you for all the work you put
into my new 510hp 460 engine. I have had the engine installed and running
for two weeks. In that time, I have covered 2000 miles from Scotland to
Ireland and Scotland to Wales with no problems what-so-ever.
The oil was changed after 500 Miles and we have been purring along nicely
ever since. Thanks for all your work Tim. If I had any questions. I wouldn't hesitate, and in fact haven't, to
recommend your services to my friends.
During my travels promoting the new Starsky & Hutch Movie a lot of people
have seen my new engine. Everyone was very impressed. Thanks for everything

Best Regards

Brad

1976 Torino, 460 / 500 HP Complete Engine
bradley.thompson@edinst.com

 

Hi

I ordered my 351w/400hp package turnkey this winter. Im very satisfied with the
service and the product itself. Absoutley a turn key engine. Runs like a dream
and very strong on low revs. It´s a perfect engine for my Mach 1 ´70 Ford
Mustang.

Best regards
Stig Bjorkman
Sweden  stig@kanonfm.com  September 08, 2004
 

   

 

 

 

 

 

 

   

 Thanks for your quick response. i purchased a 351 windsor with 400 hp for my 1971 Ford Torino 500.  the engine i purchased from you runs like a dream. I'm a young guy and i have never driven a car with so much power and I can't describe the thrill i got the first time i mashed the peddle to the floor. the engine looks great as well and the installation was easy. thank you for your attention to detail in every step of building this engine. here are a few pictures of the engine and car. thanks again. - Ryan  clover83@cox.net 

 

 

 

 

 

 

 

 

 

I would like to thank all you guys at the engine factory for the best service i have received for along time '100%',from the time the order was placed with Mark here in England to the delivery of the engine to my home 21 days later, Excellent service, and an excellent engine,

many thanks to you all,

Brian Durbridge   

Oxford England   3/1/05

 

I ‘m sorry. This is a translation into English (as good as it gets when I’m doing it):

Being a specialist for restoration, repair and maintenance of sport- and racing cars from the ‘50s to the ‘70s, I recommend the engines from the Engine Factory.

Having made my own positive experiences I can honestly give you this statement.

Engine Factory delivers true ‘Turn Key Engines’.

Well, in German it sounds definitely smoother.

Kind regards

Axel

 

Dear Engine Factory

I could not be happier with my new engine and I was even more pleased with

the customer service from the Engine Factory.  After it was all over with, I

was even more surprised. [read more]

 

 

A very sincere, thank you!

Eric

Anchorage, Alaska 7/19/2007

 

Hello:

FYI: I purchased your 400HP / 351W engine for my Factory Five Cobra and had a problem with the distributor. The pin had some how walked. You had sent another one at no charge being it only had a limited amount of mileage.   The replacement is in the car now and it seems to run better with it in than the old one.   I will keep an eye on it for the rest of the driving season (not much left here in Canada). Engine runs strong otherwise and looks great , thanks for the excellent service on sending me A new distributor .

And if you get this today have a great long weekend

8/31/07

Martin Wouterse

 

Thanks for all the help with the V8 conversion.  I purchased the 350hp 302 for my 1965 coupe and couldn’t be happier!  Sounds amazing through long tubes and flowmasters and feels even better when standing on it.  You guys absolutely rock!

Michael Kelly - Scotch Plains, NJ

9/5/07   md622@hotmail.com

 

 

ENGINE FACTORY INC.

1-800-704-5385